Rybo Runners

DonK · 01-31-2008, 04:25 PM

I am desperately searching for anyone that can help me prove U.S. build of my newly acquired 1986 Fisher Marine Tech/Rybo Runner. (awesome platform)

I am trying to get a 'coastwise trade' endorsement from the National Vessel Documentation Center, and they require proof of the vessel being built in the U.S.; an impossible task because FMT is no longer in existence, and no records are to be found.

I am looking for anyone that was an employee at the Rybovich yard during the Fisher ownership (1986 specifically), and would be able to provide an affidavit (as per the NVDC req's) that states knowledge of my boat a being built in the US.

Even better if anyone knows how to track down the original mfg.'s records...but I know that is a long shot.

I will discuss details further with serious leads; please contact me at
donk@thefishtank.cc

Quack, thanks for the leads so far!

quack quack · 02-01-2008, 08:12 AM

Mike R can say your boat was built in US can't he.

DonK · 02-01-2008, 08:39 AM

He says he was fairly disassociated from FMT at that point; and although he offered to state it was finished in the Rybovich yard, he could not be able to be any more specific.

I rec'd a PM from someone who can help...for which I am grateful.
You have been very helpful thoughout my ordeal as well, QQ! and the offshore offer to you stands!

Don

01-31-2008, 04:25 PM	#1 (permalink)
DonK Hooked Up Join Date: Feb 2007 Location: Boca Raton Boat: "the Fish-Tank", 1986 Rybo Runner Best Catch: 395# Broadbill Occupation: Restaurant software engineer, Sun Sentinel Restaurant Reviewer, Mis-Boated 6-pack Capt. Posts: 480	Rybo Runners I am desperately searching for anyone that can help me prove U.S. build of my newly acquired 1986 Fisher Marine Tech/Rybo Runner. (awesome platform) I am trying to get a 'coastwise trade' endorsement from the National Vessel Documentation Center, and they require proof of the vessel being built in the U.S.; an impossible task because FMT is no longer in existence, and no records are to be found. I am looking for anyone that was an employee at the Rybovich yard during the Fisher ownership (1986 specifically), and would be able to provide an affidavit (as per the NVDC req's) that states knowledge of my boat a being built in the US. Even better if anyone knows how to track down the original mfg.'s records...but I know that is a long shot. I will discuss details further with serious leads; please contact me at donk@thefishtank.cc Quack, thanks for the leads so far! __________________

02-01-2008, 08:12 AM	#2 (permalink)
quack quack Old Salt Join Date: Nov 2005 Location: lake worth Best Catch: 25lb codfish 5 yrs old first hanger Posts: 4,540	Mike R can say your boat was built in US can't he. __________________ Either we can be a part of the solution or we can be the victims of a decision.

02-01-2008, 08:39 AM	#3 (permalink)
DonK Hooked Up Join Date: Feb 2007 Location: Boca Raton Boat: "the Fish-Tank", 1986 Rybo Runner Best Catch: 395# Broadbill Occupation: Restaurant software engineer, Sun Sentinel Restaurant Reviewer, Mis-Boated 6-pack Capt. Posts: 480	He says he was fairly disassociated from FMT at that point; and although he offered to state it was finished in the Rybovich yard, he could not be able to be any more specific. I rec'd a PM from someone who can help...for which I am grateful. You have been very helpful thoughout my ordeal as well, QQ! and the offshore offer to you stands! Don __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rybo Runner 30' for sale	winston	Boats	10	10-26-2007 10:29 AM
best bait for runners	just2fish	Swordfishing	22	08-01-2007 07:52 PM
Catching Gogs and runners out of PE	pelagic predator	Swordfishing	4	07-15-2007 06:42 PM
Runners question	Dusky Mike	Live Bait Reports	3	01-22-2007 02:42 PM
Different ways to rig blue runners?	SFLMAN	Swordfishing	6	07-02-2004 07:34 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)